Engineered Character Oak flooring has reigned amongst our top 3 floors for many years. As it’s name suggests Character Oak is a truly characterful grade, providing a timeless, classic floor. Perfectly at home in period properties and barn conversions but equally within apartments and new-builds adding depth and warmth. Expect beautiful grain patterns, swirls and streaks of caramel hues and occasional (filled) knots of various sizes. Clear UV Oil and Lacquer finishes both protect the floor and enrich warm tones, grain structure and figuring. Character Oak like a fine wine is enhanced over time by a rich, warm golden patina as can be seen in the photographs within this page.
The Character Oak engineered floor above was specified in a 187mm width, which over the years has proven to be the perfect width for an elegant Character Oak floor. Our Low-Lustre UV Oil finish provides instant hard-wearing protection and enriches the warm tones, beautiful grain patterns and figuring with a subtle sheen.
Character Grade European Oak – UV Oiled 125mm – 200mm wide £51.20m2 + V.A.T
Character Grade European Oak – UV Oiled 210mm – 260mm wide £55.90m2 + V.A.T
Our Character Oak engineered flooring is supplied unfinished : bare,sanded floorboards as standard. European Oak is naturally a light, biscuit grey in colour. These beautiful natural tones can be retained by specifying our Natural UV Oil finish.
Character Grade European Oak – Unfinished – 125mm – 200mm wide £46.500m2 + V.A.T
Character Grade European Oak – Unfinished – 210mm – 260mm wide £54.00m2 + V.A.T
These beautiful natural tones can be retained by specifying our Natural UV Oil finish.
An engineered Character Oak Tongue & Groove floor is a perfect classical yet 21st century choice. All of our engineered hardwood flooring can be used over all types of under floor heating systems or structurally. This timeless Oak floor looks beautiful within country cottages, barn conversions and period properties but equally at home in a contemporary interior adding natural warmth, depth and a polished rustic edge. As a rule of thumb the larger the room the wider the floor-board…
Engineered Character Oak Flooring – Technical Specification
Our engineered Character European Oak Flooring is 20mm thick
The floorboard thickness is 20mm. 5mm thick – Solid Character Grade European Oak hardwood wear layer & 15mm Birch plywood substrate.
Engineered Character Oak Flooring is Tongue & Grooved on all 4 sides – End-Matched
Our engineered Character Oak flooring is suitable for use with all types of under floor heating systems.
Engineered Character Oak T & G flooring is also suitable for structural use as it can be fixed directly to floor joists.
All of our engineered hardwood floorboards are machined with a micro-bevel as standard (long sides). Square-shoulder available on request.
Engineered Character Oak Flooring is available in fixed or mixed widths 125mm up to a maximum of 260mm
Engineered Character Oak Flooring lengths are typically 2400mm, some boards may be built-up to obtain length, expect some shorter lengths in a pack.
As standard our engineered Character Oak Flooring is supplied unfinished (filled and sanded, ready-to-finish). Staining and factory UV Oil finishing is priced additionally.
Prices are per square metre and exclusive of V.A.T
Please note that descriptions and photographs of individual timbers & grades describe typical characteristics to expect. Character Oak is a natural material and as such each floor and floorboard is inherently and naturally unique.